[Design Precautions]
WARNING
● Configure safety circuits external to the programmable controller to ensure that the entire system
operates safely even when a fault occurs in the external power supply or the programmable
controller. Failure to do so may result in an accident due to an incorrect output or malfunction.
(1) Emergency stop circuits, protection circuits, and protective interlock circuits for conflicting
operations (such as forward/reverse rotations or upper/lower limit positioning) must be
configured external to the programmable controller.
(2) Machine OPR (Original Point Return) of the positioning function is controlled by two kinds of
data: an OPR direction and an OPR speed. Deceleration starts when the near-point watchdog
signal turns on. If an incorrect OPR direction is set, motion control may continue without
deceleration. To prevent machine damage caused by this, configure an interlock circuit external
to the programmable controller.
(3) When the CPU module detects an error during control by the positioning function, the motion
slows down and stops.
Q系列PLC存储卡用适配器 Q2MEM-ADP
Q系列编程器ATA卡 Q2MEM-32MBA
Q系列编程器SRAM卡用电池 Q2MEM-BAT
Q系列编程器ATA卡 Q2MEM-16MBA
可选功能板 GT15-MESB48M
Q系列PLC内存卡 Q3MEM-4MBS
Q系列PLC内存卡 Q2MEM-1MBS
闪存卡 QD81MEM-4GBC
Q系列PLC线性快闪存储卡 Q2MEM-4MBF
Q系列PLC线性快闪存储卡 Q2MEM-2MBF
CF卡 GT05-MEM-16GC
Q系列编程器ATA卡 Q2MEM-8MBA
MES接口模块 QJ71MES96
模块 A1SJ71ME81
CF卡 GT05-MEM-512MC
CF卡 GT05-MEM-256MC
模块 AJ71ME81
MES接口模块附件 GT05-MEM-256MC
闪存卡 QD81MEM-1GBC
CF卡 GT05-MEM-8GC
Q系列编程器SRAM卡用电池 Q3MEM-BAT
可选功能板 GT16-MESB
Q系列PLC内存卡 Q2MEM-2MBS
CF卡 GT05-MEM-1GC
闪存卡 QD81MEM-512MBC
存储卡适配器 GT05-MEM-ADPC
闪存卡 QD81MEM-2GBC
Q系列PLC存储卡 Q3MEM-8MBS-SET
CF卡 GT05-MEM-4GC
Q系列PLC存储卡 Q3MEM-4MBS-SET