Note that even items ranked as " CAUTION", may lead to major results depending on the situation. In any case,
important information that must always be observed is described.
Not applicable in this manual.
Items related to operation
If the operation start position is set in a block which is in the middle of the program and the program is
started, the program before the set block is not executed. Please confirm that G and F modal and
coordinate values are appropriate. If there are coordinate system shift commands or M, S, T and B
commands before the block set as the start position, carry out the required commands using the MDI, etc.
If the program is run from the set block without carrying out these operations, there is a danger of
interference with the machine or of machine operation at an unexpected speed, which may result in
breakage of tools or machine tool or may cause damage to the operators.
Under the constant surface speed control (during G96 modal), if the axis targeted for the constant surface
speed control moves toward the spindle center, the spindle rotation speed will increase and may exceed
the allowable speed of the workpiece or chuck, etc. In this case, the workpiece, etc. may jump out during
machining, which may result in breakage of tools or machine tool or may cause damage to the operators.
When the user may be subject to imminent fatalities or major injuries if handling is
mistaken.
When the user may be subject to fatalities or major injuries if handling is mistaken.
When the user may be subject to bodily injury or when physical damage may occur if
handling is mistaken.
DANGER
WARNING
CAUTION
DANGER
WARNING

伺服控制器 MR-J2S-22KB
控制器放大器总线电缆 MR-J2HBUS1M-A
PLC FX1S-10MT-ESS/UL
模拟量输入模块 AJ35T-M04B-K
PLC FX1S-30MT-ES/UL
PLC FX2N-128MT-001
PLC FX3G-60MT/ESS
控制器放大器总线电缆 MR-J2HBUS5M-A
PLC FX3U-48MT/ESS
伺服马达 HA-LFS701MB
伺服马达 HF-MP73
伺服驱动器 MR-J2S-20A
伺服电机 HC-MFS43B
伺服电机 HC-MFS43K
伺服控制器 MR-J2S-30KA4
PLC FX2N-16MT-DSS
编码器用电缆 MR-EKCBL10M-H
PLC FX2N-64MR-001
Q系列编程器ATA卡 Q2MEM-32MBA
伺服控制器 MR-J2S-350A
伺服电机电源用电缆 MR-PWS1CBL10M-A2-L
PLC FX1N-40MT-ESS/UL
伺服电机 HC-MFS13B
PLC FX2N-48MR-D
PLC FX2N-80MR-DS
伺服控制器 MR-J2S-22KA
伺服电机电源用电缆 MR-PWS2CBL03M-A1-L
编码器电缆 MR-JHSCBL30M-L
CF卡 GT05-MEM-1GC
嵌入型I/O模块 AJ65MBTL1N-16T