4. Handling Precautions
(1) Do not drop the module or subject it to heavy impact.
(2) Do not remove the PCB of the module from its case.
Doing so may cause the module to fail.
(3) Prevent foreign matter such as dust or wire chips from entering the
module.
Such foreign matter can cause a fire, failure, or malfunction.
(4) A protective film is attached to the top of the module to prevent foreign
matter, such as wire chips, from entering the module during wiring.
Do not remove the film during wiring.
Remove it for heat dissipation before system operation.
(5) Before handling the module, touch a grounded metal object to
discharge the static electricity from the human body.
Failure to do so may cause the module to fail or malfunction.
(6) Tighten the terminal screws using torque within the following ranges.
Loose screws may cause short circuits, mechanical failures or
malfunctions.
(7) To mount the module on the base unit, fully insert the module fixing
latch into the fixing hole in the base unit and press the module using the
hole as a fulcrum.
Improper installation may result in a module malfunction, or may cause
the module to fall off.
Screw location Tightening torque range
Module fixing screw (M3 screw) 0.36 to 0.48 N•m
FG terminal screw (M3 screw) 0.42 to 0.58 N•m
电流输入模拟量模块 Q68ADI
模块 A1SD35ID1
模块 AJ35PP-CNV-SI
模拟量输入模块 Q68ADV，Q68ADI
模块 AJ71ID2-R4
适配器 Q6DIN2
模拟量模块 AJ65VBTCU-68ADIN
模块 AJ71ID1-R4
模块 A1SD35ID2
中断模块 AI61
模拟输出模块 A616DAI
转换电缆 FX2N-CNV-IF
模拟量输出模块 Q68DAV，Q68DAI
中断输入模块 QI60
模块 A1SD32ID2
中继模块 AJ65BT-RPI-10B
外部输入/输出单元 GT15-DIOR
模块 AJ35PTC-CNV-GI
ID接口模块 QD35ID1
模块 AD32ID1
CCLink模块 AJ65BT-64DAI
适配器 Q6DIN1
模块 AJ35PTC-CNV-GI
模块 AJ35PTC-CNV-SI
外部输入/输出单元 GT15-DIO
模块 A1SJ71ID1-R4
模块 AD32ID2
模块 AJ35PP-CNV-GI
模拟量输出模块 A616DAI
适配器 Q6DIN1A