esign precautions]
DANGER
Configure a safety circuit outside the PL C, so that the entire system operates
safety even if there is an external power error or if the PLC is malfunctioning.
(1) The output status to the outside varies, depending on the output status
setting in the external-output control setting mode: Please be careful
when performing the setting. Refer to the Section 3.3.9 of detailed manual
for details on the output status.
(2) Due to malfunction of the output el ement or its internal circuit, normal
output may not be obtained or erroneous output may be performed.
For output signals that may cause a severe accident, set an external
circuit to monitor the output.
模拟量输出模块 A68DAI-S1
电流输出模拟量模块 Q68DAIN
ID接口模块 QD35ID1
中继模块 AJ65BT-RPI-10A
转换电缆 FX2N-CNV-IF
中断模块 AI61-S1
模块 AJ35PP-CNV-GI
中继模块 AJ65BT-RPI-10B
模块 AJ35PP-CNV-SI
模块 AD32ID1
模块 AD35ID2
模块 AJ35PP-CNV-GI
中断模块 QI60
模块 A1SD32ID1
模拟量模块 AJ65VBTCU-68ADIN
模拟量输出模块 A616DAI
外部输入/输出单元 GT15-DIOR
适配器 Q6DIN3
模拟量输出模块 Q68DAV，Q68DAI
适配器 Q6DIN1A
模块 A1SD35ID1
适配器 Q6DIN1
模块 AD35ID1
模块 AJ71ID2-R4
CCLink模块 AJ65BT-64DAI
模块 A1SJ71ID2-R4
中断输入模块 QI60
外部输入/输出单元 GT15-DIO
速中断模块 A1SI61
AS-I主站模块 FX2N-32ASI-M