1. Items related to product and manual
For items described as "Restrictions" or "Usable State" in this manual, the instruction manual issued by
the machine tool builder takes precedence over this manual.
Items not described in this manual must be interpreted as "not possible".
This manual is written on the assumption that all optional functions are added. Confirm the specifications
issued by the machine tool builder before use.
Some screens and functions may differ or may not be usable depending on the NC system version.
2. Items related to connection
When using an inductive load such as relays, always contact a diode in parallel to the load as a noise
measure.
When using a capacitive load such as a lamp, always connect a protective resistor serially to the load to
suppress rush currents.
Since the analog output R registers are allocated in ascending order of channels and station numbers, the
analog output destination may change depending on added option.
3. Items related to design
Always turn the spindle phase synchronization completion signal ON before chucking both ends of the
workpiece to the basic spindle and synchronous spindle. If the spindle phase synchronization signal is
turned ON when both ends of the workpiece are chucked to the basic spindle and synchronous spindle, the
chuck or workpiece could be damaged by the torsion that occurs during phase alignment.
CAUTION
CN4电缆 MR-H3CBL1M
伺服放大器 MR-J3-70A
伺服放大器 MR-J2S-350B4
伺服马达 HF-MP13
伺服电机电源用电缆 MR-PWS1CBL5M-A2-H
伺服马达 HF-MP23
PLC FX1N-40MR-001
PLC FX1N-60MR-D
PLC FX2N-32MR-D
附件 MR-J2HBUS05M
PLC FX3G-14MT/ESS
编码器用电缆 MR-ENECBL2M-H
模拟量输入模块 AJ35T-M08B-L
伺服驱动器 MR-J2S-37KB4
PLC FX1S-10MT-DSS
编码器电缆 MR-ENCBL5M-H
Q系列PLC存储卡用适配器 Q2MEM-ADP
控制器放大器总线电缆 MR-J2CN1-A
PLC FX1N-60MT-D
伺服电机 HC-MFS23BK
电磁制动器用电缆 MR-BKS1CBL10M-A1-L
个人电脑通信电缆 MR-JRPCATCBL3M
CF卡 GT05-MEM-4GC
PLC FX2NC-32MT-D/UL
可选功能板 GT15-QFNB16M
可编程控制器 FX1N-24MR-001
GT16触摸屏 GT1675M-VTBD
PLC FX2N-128MR-001
PLC FX1S-14MR-ES/UL
嵌入型I/O模块 AJ65MBTL1N-16DT