Please save this manual to make it accessible when required and always forward it to the end user.
[Design Precautions]]
DANGER
Some failures of the GOT, communication unit, communication board or cable may keep the outputs
on or off.
An external monitoring circuit should be provided to check for output signals which may lead to a
serious accident.
Not doing so can cause an accident due to false output or malfunction.
If a communication fault (including cable disc onnection) occurs during monitoring on the GOT,
communication between the GOT and PLC CPU is suspended and the GOT becomes inoperative.
For bus connection : The CPU becomes faulty and the GOT becomes inoperative.
For other than bus connection : The GOT becomes inoperative.
A system where the GOT is used should be configur ed to perform any significant operation to the
system by using the switches of a device ot her than the GOT on the assumption that a GOT
communication fa ult will occur.
Not doing so can cause an accident due to false output or malfunction.
Do not use the GOT as the warning device that may cause a serious accident.
An independent and redundant hardware or mechanical interlock is required to configure the device
that displays and outputs serious warning.
Failure to observe this in struction may result in an accident due to incorrect output or malfunction.
运动CPU单元 A73CPUR21-S1
输入输出模块 A0J2-E28AS
伺服电机 HC-RFS203
变频器 FR-F740-S110K-CHT
输入模块 AJ65SBTB3-16KD
伺服马达 HF-SP51
伺服控制器 MR-J2S-30KA4
模拟量输出模块 A0J2-D61S1
PLC FX1S-10MR-ES/UL
DC 输入/晶体管输出模块 AJ65SBTB32-16DT
编码器电缆 MR-JHSCBL30M-H
伺服电机 HC-SFS3524
CPU单元 A1SJCPU-S3
Q系列PLC存储卡 Q3MEM-8MBS
伺服马达 HA-LFS12K1
输入模块 A1SX10
背光灯 GT16-80SLTT
网络模块 A1SJ72QLP25
PLC FX1N-40MT-ES/UL
电磁制动器用电缆 MR-BKS1CBL10M-A2-H
PLC FX2N-32MS-E/UL
中继模块 AJ65SBT-RPT
PLC FX1S-14MR-ES/UL
SSCNET Ⅲ 光纤 MR-J3BUS015M
保护膜 GT15-50PSCB
AC 输入/可控硅输出模块 AJ35PTF-28AS
输出模块 A1SY10EU
老款小A系列主基板 QA1S35B
速输入用适配器 FX3U-4HSX-ADP
伺服马达 HC-UFS202