Communication Module.
This manual provides information for the use of the FX2N-32CAN Communication Module. The
manual has been written to be used by trained and competent personnel. The definition of
such a person or persons is as follows:
a) Any engineer who is responsible for the planning, design and construction of automatic
equipment using the product associated with this manual should be of a competent
nature, trained and qualified to the local and national standards required to fulfill that
role. These engineers should be fully aware of all aspects of safety with regards to
automated equipment.
b) Any commissioning or service engineer must be of a competent nature, trained and
qualified to the local and national standards required to fulfill that job. These engineers
should also be trained in the use and maintenance of the completed product. This
includes being completely familiar with all associated documentation for said product. All
maintenance should be carried out in accordance with established safety practices.
c) All operators of the completed equipment (See Note) should be trained to use that
product in a safe manner in compliance to established safety practices. The operators
should also be familiar with documentation which is connected with the actual ope
PLC FX2N-32MR-DS
PLC FX2N-32MR-UA1/UL
继电器输出单元 FX2N-32ER
PLC FX2N-32MT-ESS/UL
PLC FX2N-32MR-001
PLC FX2N-32MT-E/UL
PLC FX2N-32MT-DSS
可控硅输出单元 FX2N-32ES
CC-Link用接口模块 FX2N-32CCL
PLC FX2N-32MT-D
AS-I主站模块 FX2N-32ASI-M
晶体管输出单元 FX2N-32ET
PLC FX2N-32MT-ES/UL
PLC FX2N-32MR-ES/UL
PLC FX2N-32MS-E/UL
PLC FX2N-32MS
PLC FX2N-32MT-001
PLC FX2N-32MR-D