(2) Access to bit devices
When a bit device is accessed via mdSend( ) and mdReceive( ), the leading
device number must be set as shown in the following table.
Computer link communication
(Only when using AJ71C24 or AJ71UC24)
Ethernet communication (TCP/IP)
(Only when using AJ71E71)
Access to RX, RY and SB in the CC-Link card
(local station)
Multiple of 16 (0, 16, 32...)
Miscellaneous Multiple of 8 (0, 8, 16...)
(3) Restrictions on use of the FXCPU
(a) Access to (read from/write to) CN device (current value) number 200 and later
of the FXCPU cannot be made.
(b) When the FXCPU is used, access to devices V, Z cannot be made.
(c) When the FXCPU is used, access to device TN (timer current value) number
199 and earlier can be made but access to number 200 and later cannot be
made.
(4) Use of VB 4.0 and VC++ 4.2
When using VB 4.0 or VC++ 4.2, you cannot make CC-Link communication and
CPU board communication.
(5) Multithreading communication
Multithreading communication cannot be made.
模块 AJ35PP-CNV-SI
模拟量模块 AJ65BT-64DAI
中断输入模块 QI60
速中断模块 A1SI61
模拟量模块 AJ65VBTCU-68ADIN
模块 AJ71ID1-R4
模块 AJ35PP-CNV-GI
AS-I主站模块 FX2N-32ASI-M
模拟量输出模块 A68DAI-S1
中断模块 QI60
仿真单元 A6SIM-X64Y64
RS-232C通讯用模块 FX2N-232IF
模块 AJ35PTC-CNV-GI
ID接口模块 QD35ID1
模块 AJ71ID2-R4
模块 A1SD32ID2
ID接口模块 QD35ID2
模块 AD35ID1
外部输入/输出单元 GT15-DIO
模块 AJ35PP-CNV-GI
转换电缆 FX2N-CNV-IF
转换适配器 FX2NC-CNV-IF
模块 AD35ID2
模拟量输入模块 Q68ADV，Q68ADI
适配器 Q6DIN2
中断模块 AI61
中继模块 AJ65BT-RPI-10A
中继模块 AJ65BT-RPI-10B
模拟量输出模块 A616DAI
模块 AJ35PTC-CNV-GI