A - 2
3. To prevent injury, note the follow
CAUTION
Only the voltage specified in the Instruction Manual should be applied to each terminal. Otherwise, a burst,
damage, etc. may occur.
Connect the terminals correctly to prevent a burst, damage, etc.
Ensure that polarity ( , ) is correct. Otherwise, a burst, damage, etc. may occur.
Take safety measures, e.g. provide covers, to prevent accidental contact of hands and parts (cables, etc.)
with the servo amplifier heat sink, regenerative brake resistor, servo motor, etc.since they may be hot
while power is on or for some time after power-off. Their temperatures may be high and you may get burnt
or a parts may damaged.
During operation, never touch the rotating parts of the servo motor. Doing so can cause injury.
伺服控制器 MR-J2S-700B
伺服驱动器 MR-J2S-100A4
伺服控制器 MR-J2S-15KA
伺服控制器 MR-J2S-11KB
伺服控制器 MR-J2S-11KB4
伺服控制器 MR-J2S-15KB
伺服控制器 MR-J2S-30KB
伺服驱动器 MR-J2S-60B4
伺服放大器 MR-J2S-55KB4
伺服放大器 MR-J2S-100B4
附件 MR-J2HBUS5M
伺服放大器 MR-J2S-200A
控制器放大器总线电缆 MR-J2HBUS1M-A
伺服放大器 MR-J2S-70B
伺服放大器 MR-J2S-45KB4
伺服驱动器 MR-J2S-10B
伺服驱动器 MR-J2S-20B
伺服驱动器 MR-J2S-15KB4
伺服放大器 MR-J2S-200B4
伺服驱动器 MR-J2S-350A4
控制器放大器总线电缆 MR-J2HBUS5M-A
伺服控制器 MR-J2S-500B
CN1接头 MR-J2CN1
伺服控制器 MR-J2S-37KA
伺服控制器 MR-J2S-700B4
伺服驱动器 MR-J2S-55KA4
伺服控制器 MR-J2S-22KB
CON2接头 MR-J2CMP2
伺服放大器 MR-J2S-11KA
伺服控制器 MR-J2S-350B