[Design Instructions]
!

DANGER
• Some failures of the GOT main unit, communication module, communication board or cable may
keep the outputs on or off.
An external monitoring circuit should be provided to check for output signals which may lead to a
serious accident.
Not doing so can cause an accident due to false output or malfunction.
• If a communication fault (including cable disconnection) occurs during monitoring on the GOT,
communication between the GOT and PLC CPU is suspended and the GOT becomes inoperative.
For bus connection : The CPU becomes faulty and the GOT inoperative.
For other than bus connection : The GOT becomes inoperative.
A system where the GOT is used should be configured to perform any significant operation to the
system by using the switches of a device other than the GOT on the assumption that a GOT
communication fault will occur.
Not doing so can cause an accident due to false output or malfunction.
!

CAUTION
• Do not bundle the control and communication cables with main-circuit, power or other wiring.
Run the above cables separately from such wiring and keep them a minimum of 100mm apart.
Not doing so noise can cause a malfunction.
PLC FX3G-60MT/ES-A
PLC FX3U-16MT/ESS
晶体管输出模块 AJ65SBTB2-16T
伺服放大器 MR-J2S-100A
模拟量温度输入模块 AJ65SBT2B-64RD3
网络模块 A1SJ71QLP21
伺服驱动器 MR-J2S-60A4
温度调节模块 A1S64TCTRT
串行通信模块 A1SJ71QC24N1-R2
伺服马达 HA-LFS11K24
以太网接口模块 A1SJ71E71-B2-S3
伺服电机 HC-RFS353
输入模块 A1SX10
伺服电机 HC-SFS102B
CPU组件 A2SHCPU
伺服控制器 MR-J2S-37KB
伺服马达 HF-SP152B
PLC FX1N-60MR-ES/UL
MES接口模块 QJ71MES96
编码器接头 MR-J3ENSCBL20M-L
以太网接口模块 A1SJ71E71-B5-S3
GOT到GOT长距离连接电缆 GT15-C200BS
变频器 FR-F740-S132K-CHT
伺服电机 HC-KFS053B
伺服电机 HC-SFS202
DC 输入/晶体管输出模块 AJ65SBTC1-32DT
手持式触摸屏 GT1665HS-VTBD
PLC FX3U-64MT/ES-A
模块 AJ35PP-CNV-SI
伺服控制器 MR-J2S-15KA4