CAUTION
z Always connect the FG terminals to the ground using class D (class 3) or
higher grounding exclusively designed for programmable controller.
z When connecting cables to the terminal block for external power supply,
check the rated voltage and terminal layout of the product for correct wiring.
Connecting a cable to power supply of different voltage or incorrect wiring
may cause a fire or fault.
z Tighten terminal screws to the specified torque.
If a terminal screw is not tightened to the specified torque, it the module may
fall out, short circuit, or malfunction.
If a terminal screw is tightened excessively, exceeding the specified torque,
the module may fall out, short circuit, or malfunction due to breakage of the
screw or the module.
z Solder the coaxial cable connector properly. Incomplete soldering may
cause a malfunction.
z Be sure there are no foreign substances such as sawdust or wiring debris
inside the module. Such debris could cause fires, damage, or erroneous
operation.
z Make sure to place the communication and power cables into a duct or
fasten them using a clamp.
Cables not placed in the duct or not clamped may hang or shift, allowing
Q系列编程器ATA卡 Q2MEM-8MBA
闪存卡 QD81MEM-8GBC
CF卡 GT05-MEM-1GC
Q系列PLC存储卡 Q3MEM-4MBS-SET
CF卡 GT05-MEM-4GC
闪存卡 QD81MEM-1GBC
Q系列编程器ATA卡 Q2MEM-16MBA
Q系列编程器ATA卡 Q2MEM-32MBA
可选功能板 GT16-MESB
MES接口模块附件 GT05-MEM-256MC
存储卡适配器 GT05-MEM-ADPC
CF卡 GT05-MEM-128MC
CF卡 GT05-MEM-8GC
闪存卡 QD81MEM-512MBC
Q系列PLC线性快闪存储卡 Q2MEM-2MBF
模块 AJ71ME81
Q系列PLC存储卡 Q3MEM-8MBS
Q系列编程器SRAM卡用电池 Q2MEM-BAT
CF卡 GT05-MEM-16GC
CF卡 GT05-MEM-2GC
MES接口模块 QJ71MES96
Q系列PLC存储卡用适配器 Q2MEM-ADP
Q系列PLC内存卡 Q3MEM-4MBS
模块 A1SJ71ME81
Q系列PLC内存卡 Q2MEM-2MBS
Q系列PLC线性快闪存储卡 Q2MEM-4MBF
可选功能板 GT15-MESB48M
Q系列PLC内存卡 Q2MEM-1MBS
Q系列编程器SRAM卡用电池 Q3MEM-BAT
MES接口模块附件 GT05-MEM-128MC