[Design Precautions]
!
DANGER
• Some faults of this module may keep the outputs on or off. An external monitoring circuit should
therefore be provided to check for output signals which may lead to a serious accident.
Not doing so can cause an accident due to mis-output or misoperation.
• If a communication error (including cable disconnection) occurs during monitoring with the GOT,
communication between the GOT and master station is interrupted, disabling operation.
When using the GOT to configure a system, assume that a GOT communication error will occur
and configure a system in which switches used to perform significant operation for the system
are provided on any device other than the GOT.
Not doing so can cause an accident due to mis-output or misoperation.
• Read Chapter 5 “Data Link Processing Time” in the Master Module User’s Manual carefully
regarding the status of each station when the PLC CPU operation is stopped or the data link
becomes a communication error.
Also, configure an interlocking circuit in the sequence program using the communication status
information (SB and SD) so that the overall system is always maintained.
An accident may occur by false output or malfunction.
• Received data form master or local data link faulty station.
1) Remote input (RX) and remote output
This varies depending on the setting of the module’s condition setting switch and input data
(SW4) of the data link faulty station.
OFF : CLEAR (all off)
ON : Keeps the data right before the error occurrence.
2) Remote registers (RWw and RWr)
The data right before the error is kept regardless of the SW4 setting.
PLC FX3G-24MT/ES-A
DC 输入/可控硅输出模块 AJ35PTF-56DS
端子排转换模块 AC05TB
Melsecnet模块 AJ72P25
伺服驱动器 MR-J2S-40A
Melsecnet模块 A1SJ71LP21GE
伺服电机电源用电缆 MR-PWS2CBL03M-A1-L
GT16触摸屏 GT1665M-VTBA
伺服控制器 MR-J2S-15KA4
PLC FX3U-64MR/ES-A
变频器 FR-A720-18.5K
伺服放大器 MR-J3-40A
主通信模块 A1SJ51T64
模块 AJ51T64
串行通信模块 AJ71QC24-R2
AC输入模块 A0J2-E32A
以太网模块 AJ71QE71
输入模块 A1SX10EU
网络模块 A1SJ71QE71N-T
扩展电缆 A1SC60B
CPU单元 Q2ASCPU
继电器输出模块 AY15CEU
Melsecnet模块 A1SJ71AP21
输出模块 AY42-S1
DC 输入模块 AJ65VBTCU3-8D1
控制器放大器总线电缆 MR-J2HBUS5M-A
温度传感器用模块 FX2N-4AD-TC
伺服放大器 MR-J2S-100A
晶体管输出模块 AJ65SBTC1-32T1
脉冲捕捉模块 A1SP60