For items described as "Restrictions" or "Usable State" in this manual, the instruction
manual issued by the machine maker takes precedence over this manual.

Items not described in this manual must be interpreted as "not possible".

This manual is written on the assumption that all option functions are added. Confirm
with the specifications issued by the machine maker before starting use.

The screens and functions may differ or be disabled depending on the NC system
version.

Do not turn "Use prohibited" signal ON. Failure to observe this could result in
malfunction in units.
2. Items related to installation and assembly

Always ground the signal cable to ensure stable operation of the system. Use
a one-point ground so that the control unit body, power distribution panel and
machine are at the same potential.
3. Items related to maintenance

Do not connect or disconnect the cables connected between each unit while
the power is ON.

Do not mount or remove each PCB while the power is ON.

Do not pull the cables when connecting/disconnecting them.