1、 三菱 C6C64C64T 三菱 C6C64C64T 编程说明书 (M系)
在ISO 码中，从控制出“（”起至控制入“）”（或“；”）止的所有信息均被视为无效。 定显示装置。因此，可在此间输入与指令纸带的名称编号等控制没有直接关系的信息。 但是，纸带存储时此间的信息（“纸带码一览表”的（B）除外）也被存储。 电源接通时为控制入状态。
在ISO 码中，从控制出“（”起至控制入“）”（或“；”）止的所有信息均被视为无效。 定显示装置。因此，可在此间输入与指令纸带的名称编号等控制没有直接关系的信息。 但是，纸带存储时此间的信息（“纸带码一览表”的（B）除外）也被存储。 电源接通时为控制入状态。
2、 三菱 C6C64C64T 三菱 C6C64C64T 编程说明书 (M系)
(1) Address check This function enables simple checking of progr am addresses in word units. If the alphabetic characters are continuous, the program error (P32) will occur. Availability of t
(1) Address check This function enables simple checking of progr am addresses in word units. If the alphabetic characters are continuous, the program error (P32) will occur. Availability of t
3、 三菱 C6C64C64T 三菱 C6C64C64T 编程说明书 (M系)
For items described in "Restrictions" or "Usable State", the instruction manual issued by the machine manufacturer takes precedence over this manual. An effort has been made to note as man
For items described in "Restrictions" or "Usable State", the instruction manual issued by the machine manufacturer takes precedence over this manual. An effort has been made to note as man
4、三菱 C6C64C64T 三菱 C6C64C64T 参数说明书
(1) Word and address A word is a collection of characters arranged in a specific sequence. This entity is used as the unit for processing data and for causing the machine to execute specifi
(1) Word and address A word is a collection of characters arranged in a specific sequence. This entity is used as the unit for processing data and for causing the machine to execute specifi
5、三菱 C6C64C64T 三菱 C6C64C64T 参数说明书(eng).pdf
Set up a compensation factor for reducing a control error in the reduction of a corner roundness and arch radius. Indicates a maximum control error (mm) in parentheses. The larger the
Set up a compensation factor for reducing a control error in the reduction of a corner roundness and arch radius. Indicates a maximum control error (mm) in parentheses. The larger the
6、三菱 C6C64C64T 三菱 C6C64C64T 连接维护说明书
Correctly connect the output side (terminal U, V, W). The servomotor will not run properly if incorrectly connected. Always install an AC reactor per each power supply unit. Alw
Correctly connect the output side (terminal U, V, W). The servomotor will not run properly if incorrectly connected. Always install an AC reactor per each power supply unit. Alw
7、三菱 C6C64C64T 三菱 C6C64C64T 使用说明书
If the tool compensation amount is changed during automatic operation (including single block stop), the amount will be validated from the next block or several blocks following. If the
If the tool compensation amount is changed during automatic operation (including single block stop), the amount will be validated from the next block or several blocks following. If the
8、三菱 C6C64C64T 三菱 C6C64C64T 网络使用说明书.pdf
For items described as "Restrictions" or "Usable State" in this manual, the instruction manual issued by the machine maker takes precedence over this manual. Items not described in th
For items described as "Restrictions" or "Usable State" in this manual, the instruction manual issued by the machine maker takes precedence over this manual. Items not described in th
9、三菱 C70系列 三菱 C70系列 PLC接口说明书
Incorrect connections may damage the devices, so connect the cables to the specified connectors. When connecting to a personal computer and a unit with the RS-232/USB interface, an electric
Incorrect connections may damage the devices, so connect the cables to the specified connectors. When connecting to a personal computer and a unit with the RS-232/USB interface, an electric
10、三菱 C70系列 三菱 C70系列 编程说明书(L系)
(注1) 英制/公制的切换，可通过参数画面进行(#1041 I_inch；仅接通电源时有效)，也可通过G指令(G20,G21) 进行。 但是、通过G指令只可以切换输入指令单位、无法实现输入设定单位的切换。因此、刀具偏置量等补偿 量及变量数据，请预先按照输入设定单位进行设定。 (注2) 公制单位与英制单位不能并用。 (注3) 当在输入指令单位不同的轴之间进行圆弧插补时，
(注1) 英制/公制的切换，可通过参数画面进行(#1041 I_inch；仅接通电源时有效)，也可通过G指令(G20,G21) 进行。 但是、通过G指令只可以切换输入指令单位、无法实现输入设定单位的切换。因此、刀具偏置量等补偿 量及变量数据，请预先按照输入设定单位进行设定。 (注2) 公制单位与英制单位不能并用。 (注3) 当在输入指令单位不同的轴之间进行圆弧插补时，
11、三菱 C70系列 三菱 C70系列,编程说明书(M系)（英）
If the operation start position is set in a block which is in the middle of the program and the program is started, the program before the set block is not executed. Please confirm that G and
If the operation start position is set in a block which is in the middle of the program and the program is started, the program before the set block is not executed. Please confirm that G and
12、三菱 C70系列 三菱 C70系列,编程说明书(M系)
(1) 执行主轴同期时，必须同时对基准主轴和同期主轴发出旋转指令。但是，同期主轴的旋转方向与正反转指 令无关，而是取决于基准主轴的旋转方向和主轴同期旋转方向。 (2) 在主轴转速指令为ON的状态下，接通主轴同期控制信号，虽然会进入主轴同期控制模式，但是不会进行 实际的同期控制。向基准主轴发出转速指令之后才会进行同期控制，输出主轴同期完成信号。 (3) 主轴同期控制下正
(1) 执行主轴同期时，必须同时对基准主轴和同期主轴发出旋转指令。但是，同期主轴的旋转方向与正反转指 令无关，而是取决于基准主轴的旋转方向和主轴同期旋转方向。 (2) 在主轴转速指令为ON的状态下，接通主轴同期控制信号，虽然会进入主轴同期控制模式，但是不会进行 实际的同期控制。向基准主轴发出转速指令之后才会进行同期控制，输出主轴同期完成信号。 (3) 主轴同期控制下正
