Never disassemble or modify the module.
Failure to observe this could lead to trouble, malfunctioning, injuries or fires.
Completely turn off the externally supplied power used in the system before installing or
removing the module.
Not doing so may cause an operation failure or damage to the module.
Before starting test operation, set the parameter speed limit value to the slowest value, and
make sure that operation can be stopped immediately if a hazardous state occurs.
Always make sure to touch the grounded metal to discharge the electricity charged in the body,
etc., before touching the module.
对应SSCNET定位模块 QD75M2
定位模块 QD75P2
差动输出定位模块(升级版) QD75D1N
定位模块 QD75P1
对应SSCNET III定位模块 QD75MH1
对应SSCNET定位模块 QD75M4
对应SSCNET III定位模块 QD75MH2
差动输出定位模块 QD75D1
定位模块(升级版) QD75P2N
定位模块 QD75P4
差动输出定位模块 QD75D2
定位模块(升级版) QD75P1N
对应SSCNET定位模块 QD75M1
定位模块 QD75P1，QD75P2，QD75P4
差动输出定位模块(升级版) QD75D4N
对应SSCNET III定位模块 QD75MH4
定位模块(升级版) QD75P4N
差动输出定位模块(升级版) QD75D2N
差动输出定位模块 QD75D4