A - 2 A - 2

[Installation Instructions]
!
CAUTION
• Use the programmable controller in an environment that meets the general specifications
contained in the user's manual of the CPU module to use.
Using this programmable controller in an environment outside the range of the general
specifications may cause electric shock, fire, malfunction, and damage to or deterioration of the
product.
• While pressing the installation lever located at the bottom of module, insert the module fixing tab
into the fixing hole in the base unit until it stops. Then, securely mount the module with the fixing
hole as a supporting point.
If the module is not installed properly, it may cause the module to malfunction, fail or fall off.
Secure the module with screws especially when it is used in an environment where constant
vibrations may occur.
• Tighten the screws within the range of specified torque.
If the screws are loose, it may cause the module to fallout, short circuits, or malfunction.
If the screws are tightened too much, it may cause damage to the screw and/or the module,
resulting in fallout, short circuits or malfunction.
• Before mounting/dismounting the module, be sure to shut off all phases of external power supply
used by the system.
Failure to do so may cause product damage.
• Do not directly touch the conductive area or electronic components of the module.
Doing so may cause malfunction or failure in the module.
扩展基板 Q68B
通用型Q系列CPU Q26UDHCPU
网络模块 AJ72QLP25
QCPU（Q模式）用总线连接电缆 GT15-QC150BS
通道间隔离脉冲输入 QD60P8-G
Q系列PLC内存卡 Q3MEM-4MBS
差动输出定位模块(升级版) QD75D2N
GT11触摸屏 GT1155-QTBDQ
差动输出定位模块 QD70D8
定位模块 QD75P4
大型主基板 Q38BL
差动输出定位模块(升级版) QD75D1N
串行通信模块 AJ71QC24N-R4
Q系列编程器ATA卡 Q2MEM-16MBA
扩展基板 Q63B
带内置计数器 功能的集电极 开路输出型定位模块 QD72P3C3
接口板 Q81BD-J61BT11
智能通信模块 QD51-R24
GT11触摸屏 GT1155-QSBD
冗余电源模块 Q63RP
Q系列PLC存储卡用适配器 Q2MEM-ADP
电压/电流输出模拟量模块 Q64DAN
电源冗余系统主基板 Q38RB
Web服务器模块 QJ71WS96
带基板的小点数CPU Q00JCPU-S8-SET
Ethernet模块 AJ71QE71N-B2
差动输出定位模块 QD75D2
主基板 Q33B，Q35B
以太网模块 QJ71E71-B2
GT11触摸屏 GT1150-QLBDQ