A - 1 A - 1
Please save this manual to make it accessible when required and always forward it to the end user.

[Design Precautions]
!
DANGER
• For the operation status of each station at communication error in each station, refer to the
respective manual for each station.
The communication error may result in an accident due to incorrect output or malfunction.
• When using the notification function, the pager receiver may not be contacted due to the
frequency transmission status from the system setup environment and error on the receiver
side.
To ensure the safety of the programmable controller system, install a call circuit with a lamp
display or buzzer sound.
• When performing the control of the programmable controller in operation (changing data) by
connecting a peripheral devices to the CPU module or personal computer, etc. to the intelligent
device module, configure an interlock circuit in a sequence program so the safety of the overall
system is always maintained.
Also when performing other controls of the programmable controller in operation (changing
program and operation status (status control)), read this manual carefully and confirm if the
overall safety is maintained.
Especially, when this control is performed to a remote programmable controller from an external
device, troubles that have occurred on the programmable controller side may not be able to
immediately be handled if there is a data communication error.
Define a troubleshooting agreement between external devices and the programmable controller
CPU for data communication error occurrences, as well as construct an interlock circuit in the
sequence program.
以太网模块 QJ71E71-B5
总线连接单元 GT15-75QBUS2L
冗余CPU数据跟踪电缆 QC30TR
晶体管输出模块(源型) QY82P
DC型输入模块 QX42-S1
AC/DC型输入模块 QX50
主基板 Q38B
主基板 Q33B，Q35B
CC-Link IE控制模块 QJ71GP21S-SX
电源模块 Q61P-A2
DC型速输入模块 QX70H
DC型输入模块(弹簧夹接线端子) QX80-TS
TTL CMOS输出模块 QY70
网络模块 AJ71QLP21
AC型输入模块 QX28
带内置计数器 功能的集电极 开路输出型定位模块 QD72P3C3
电压/电流输出模拟量模块 Q66DA-G
通道间隔离脉冲输入 QD60P8-G
更换用大容量电池模块 Q8BAT
热电偶型温度输入模块 Q64TDV-GH
对应SSCNET III定位模块 QD75MH2
CC-Link/LT模块 QJ61CL12
GT11触摸屏 GT1150-QLBDA
DC型输入模块 QX71
定位模块 QD75P1
Q系列PLC存储卡 Q3MEM-8MBS
电源模块 Q61P-A1
端子台配器 Q6TA32
GT10触摸屏 GT1050-QBBD
差动输出定位模块 QD70D4