[Setup and Maintenance Precautions]
!
CAUTION
• Please read this manual thoroughly and confirm the safety before starting online operations
(especially, program modifications, forced outputs, and operating status modifications), which
are performed by connecting the GX Developer via the MELSECNET/H network system to a
running CPU module of other station. Performing incorrect online operations may damage the
machinery or result in accidents.
• Never disassemble or modify the module. This may cause breakdowns, malfunctions, injuries or
fire.
• Use any radio communication device such as a cellular phone or a PHS phone more than 25cm
(9.85 inch) away in all directions of the programmable controller.
Not doing so can cause a malfunction.
• Completely turn off the externally supplied power used in the system before mounting or
removing the module. Failure to do so may damage the module or result in malfunctions.
• Do not touch the terminals while the power is on. Doing so may cause malfunctions.
• Switch off all phases of the externally supplied power used in the system when cleaning the
module or retightening the terminal or module mounting screws. Failure to completely shut off all
phases of the external power supply may cause module breakdowns and malfunctions. If the
screws are loose, it may cause the module to short-circuit, malfunction or fall off. If the screws
are tightened excessively, it may damage the screws and cause the module to short circuit,
malfunction or fall off.
• Do not install/remove the module to/from the base unit more than 50 times after the first use of
the product. (IEC 61131-2 compliant)
Failure to do so may cause malfunction.
• Before handling the module, always touch grounded metal, etc. to discharge static electricity
from the human body.
Not doing so may cause a failure or malfunction of the module.

电源模块 Q63P
适配器 Q6DIN3
DC型速输入模块 QX90H
MES接口模块 QJ71MES96
速数据记录仪模块 QD81DL96
C语言QCPU Q12DCCPU-V
多CPU速通信的主基板 Q312DB
QCPU（Q模式）用总线连接电缆 GT15-QC06B
串行通信模块 AJ71QC24N-R4
电源冗余系统用电源模块 Q64RP
老款大A系列扩展基板 QA68B
DC型输入模块 QX70
DC型输入模块 QX71
薄型主基板 Q35SB
定位模块(升级版) QD75P4N
热电偶型温度输入模块 Q64TD
GT10触摸屏 GT1055-QSBD
Q系列PLC内存卡 Q2MEM-1MBS
DC型速输入模块 QX40H
Q系列PLC大容量电池 Q7BAT
以太网模块 A1SJ71QE71N-B2
GI-50/125光缆型模块 QJ71LP21G
QCPU（Q模式）用总线连接电缆 GT15-QC150BS
铂电阻型温度调节模块(升级版) Q64TCRTN
CC-Link模块 QJ61BT11N
QCPU（Q模式）用总线连接电缆 GT15-QC200BS
FL-net模块 QJ71FL71-B5-F01
以太网模块 QJ71E71-100
通用型Q系列CPU Q10UDHCPU
CC-Link IE控制模块 QJ71GP21S-SX