CAUTION
Use the PLC in an environment that meets the general specifications contained in
this manual. Using this PLC in an environment outside the range of the general
specifications could result in electric shook, fire, malfunction, and damage to or
deterioration of the product.
Insert the tabs at the bottom of the module into the mounting holes in the base
module, and tighten the screws using the specified torque.
If the module is not properly installed, it may result in malfunctions, failure, or
fallout.
Securely connect a drive unit connector and peripheral connector to the
corresponding connector of the module.
If not attached properly, a contact error may occur, resulting in incorrect input or
output.
Always attach a cover to connectors that are not used. If not covered, malfunctions
may occur.
Do not directly touch the module's conductive parts or electronic components.
Doing so could cause malfunction or failure in the module.
保护膜 GT16-70PSCW
CPU单元 A2SCPU
性能型QCPU Q06HCPU
伺服马达 HF-SP51B
模块 AJ35PTC-CNV-GI
定位模块 QD70P8
RS422转换单元 GT15-RS2T4-9P
RS-485适配器 FX3U-485ADP
光纤中继模块 AJ65SBT-RPS
RS-422电缆 GT10-C200R4-8P
通道间隔离脉冲输入模块 QD60P8-G
模块 AJ35PP-CNV-GI
通用型Q系列CPU Q13UDHCPU
A模式Q系列CPU Q06HCPU-A
脉冲输出模块 FX2N-10PG
伺服电机电源用电缆 MR-PWS1CBL10M-A2-L
定位模块模块 AJ65BT-D75P2-S3
RS-232C适配器 FX2NC-232ADP
过程CPU Q12PHCPU
FA设备连接继电器电缆 GT11H-C15R4-8P
SI/QSI光缆型模块 QJ71LP21-25
RS-422电缆 GT10-C100R4-8P
性能型QCPU Q12HCPU
CPU单元 Q2ACPU
存储卡 FX-EPROM-8
外部连接电缆 GT16H-C30-42P
定位模块 QD70P4
编码器反馈、主轴定向、定位模块 FR-A7AP
外部连接电缆 GT16H-C80-32P
处理速度更快的CPU Q04UDHCPU