[DESIGN PRECAUTIONS]
DANGER
Create an interlock circuit on the program so that the system will operate safely based on the
communication status information. Failure to do so may cause an accident due to an erroneous
output or malfunction.
When an error occurs, all outputs are turned off in the MELSEC-ST system. (At default)
However, I/O operations of the head module and respective slice modules can be selected for the
following errors:
(1) Communication error ( MELSEC-ST CC-Link Head Module User's Manual "4.3.1 Output
status setting for module error")
(2) Slice module error
The output status for the case of an error can be set to Clear, Hold, or Preset with a command
parameter of each slice module. (For the setting availability, refer to each slice module manual.)
Since the parameter is set to Clear by default, outputs will be turned off when an error occurs.
This parameter setting can be changed to Hold or Preset when the system safety is more ensured by
holding or presetting the output.
Q系列编程器SRAM卡用电池 Q3MEM-BAT
Q系列编程器ATA卡 Q2MEM-16MBA
CF卡 GT05-MEM-1GC
闪存卡 QD81MEM-512MBC
CF卡 GT05-MEM-512MC
CF卡 GT05-MEM-4GC
Q系列PLC存储卡 Q3MEM-4MBS-SET
CF卡 GT05-MEM-2GC
存储卡适配器 GT05-MEM-ADPC
闪存卡 QD81MEM-2GBC
Q系列PLC线性快闪存储卡 Q2MEM-2MBF
闪存卡 QD81MEM-4GBC
Q系列编程器ATA卡 Q2MEM-32MBA
闪存卡 QD81MEM-1GBC
存储卡 Q1MEM-64S
可选功能板 GT16-MESB
MES接口模块 QJ71MES96
CF卡 GT05-MEM-128MC
CF卡 GT05-MEM-16GC
模块 A1SJ71ME81
CF卡 GT05-MEM-256MC
MES接口模块附件 GT05-MEM-128MC
Q系列编程器ATA卡 Q2MEM-8MBA
Q系列PLC内存卡 Q3MEM-4MBS
Q系列编程器SRAM卡用电池 Q2MEM-BAT
模块 AJ71ME81
Q系列PLC内存卡 Q2MEM-2MBS
Q系列PLC内存卡 Q2MEM-1MBS
Q系列PLC存储卡 Q3MEM-8MBS
可选功能板 GT15-MESB48M