CAUTION
z Use the PLC in the environment given in the general specifications section
of the user's manual to be used. Using the PLC outside the range of the
general specifications may result in electric shock, fire, or erroneous
operation or may damage or degrade the product.
z Insert the fixing latch on the bottom of the module into the fixing hole in the
base unit and install the module using the hole point as a fulcrum. (The
Q2AS series module shall be fastened by screws in the base unit at the
specified torque.)
Not installing the module correctly could result in erroneous operation,
damage, or pieces of the product falling.
z Tighten the screw within the range of specified torque.
If the screws are loose, it may result in fallout, short circuits or malfunction.
Tightening the screws to far may cause damage to the screw and/or the
module, resulting in fallout, short circuits or malfunction.
z Shut off all phases of the external power supply in the system before
mounting or dismounting the module.
If you do not switch off the external power supply, it will cause electric
shock or damage to the product.
z Do not touch the electronic parts or the module conducting area directly.
It may cause erroneous operation or failure.
电源模块 Q62P
对应SSCNET III定位模块 QD75MH1
老款小A系列扩展基板 QA1S65B
定位模块 QD75P1，QD75P2，QD75P4
过程CPU Q12PHCPU
冗余CPU数据跟踪电缆 QC10TR
过程CPU Q12PHCPU，Q25PHCPU
性能型QCPU Q25HCPU
扩展基板 Q612B，Q63B，Q55B
主基板 Q312B
热电偶型温度调节模块(升级版) Q64TCTTBWN
Q总线电缆用氧化铁磁芯组（两副） GT15-QFC
铂电阻型温度调节模块(升级版) Q64TCRTBWN
QCPU（Q模式）用总线连接电缆 GT15-QC150BS
性能型QCPU Q06HCPU
热电偶型温度调节模块(升级版) Q64TCTTN
网络模块 AJ71QBR11
过程CPU Q06PHCPU
通用型CPU Q00UJCPU
电压/电流输出模拟量模块 Q62DAN
定位模块 QD70P8
QCPU（Q模式）用总线连接电缆 GT15-QC100B
网络模块 AJ72QLR25
ID接口模块 QD35ID2
AC型输入模块 QX10
GT10触摸屏 GT1040-QBBD
电源模块 Q61P-A1，Q62P，Q64P
Q系列PLC大容量电池 Q7BAT
带以太网类型的Q系列CPU Q06UDEHCPU
网络模块 A1SJ72QLP25